New Diamond wire saws and other Products from UK Dima Engineering LTD

UKdima Engineering LTD

Callander
Stirling
Phone: 0844 879 4421
E-mail:
ukdima@aol.com  

HomePage
Diamond Wire tools
Top-Tec Machines
Special Projects
Specialist Project Solutions


Diamond wire saw suppliers
Portable wire saws



SWS-83 WIRE SAW

wire saws and wire sawing with wire sawsThe Advantages

The SWS-83 wire saw is the result of many years experience in wire sawing reinforced concrete. This "storage wire saw" is designed for the construction industry and is ideal for concrete cuts up to 3 m.

The saw has a maximum storage capacity of 8,3 m inside the machine. The user gets 6.3 m of wire out of the concrete without shortening the wire. The wire tension is continuously constant due to a pneumatic cylinder. The wire engine is a hydraulic motor that needs a power pack with 32 to 40 litres per minute, a minimum oil pressure of 140 bar and not less than 11,5 kW.With only two anchors in the wall, floor or ceiling, the SWS-83 is very quickly ready for use. The diagonal support allows the machine work without vibration. This 86 kg saw can be divided into three manageable parts (max. 32 kg) within only a few minutes.

The new wire hand crank at the drive wheel is a timesaving device to aid the starting of the cut, allowing the corners to be rounded off. There is optimal water cooling on both outgoing wheels. It is possible to use an endless wire due to the 360 swivel wheels. Should the swivel wheels need to be turned by 180 on the SWS-83, at that point of the cut they can be moved to the right or left so that the wire is still controlled by the wheel.

Technical facts:

  • Weight 86 kg Saw (can be disassembled into three parts: 26 kg, 28 kg, 32 kg)
  • 33 kg Compressor with piloting
  • Dimensions Height 2100 mm
  • Width 750 mm (variable)
  • Depth 700 mm
  • Tension 1400 mm
  • Compressor 10 bar, 20 litre tank, 230 V/50 Hz (or 110 V)
  • Drive-Wheel 360 mm (renewable)
  • 4 Wheels 200 mm
  • Hydraulic motor 32-40 litres/minute, min. 140 bar, min. 11,5 kW, 21 –26,5 m/s

Delivery Includes:

  • 1x SWS-83 Storage-Wire-Saw (without hydraulic aggregate)
  • 1x Diagonal support
  • 1x Compressor with piloting
  • 3x Pneumatic tubes 10 m
  • 1x Hydraulic motor
  • 2x Protection cover 1650 mm

 


UKdima Engineering LTD
Callander
Stirling
Phone: 0844 879 4421
E-mail:
ukdima@aol.com  


Diamond tools and diamond blades for all occasions.
Diamond wire saws are a speciality
Portable wire saws